HYR系列熱磨機
所屬分類：
合作咨詢：
HYR系列熱磨機
設備特點
a）進料螺旋部分采用液壓自動補償系統，自動補償蒸煮器不同溫度下其熱膨脹量不同而產生的進料螺旋頭部高度的變化。
b）主軸與磨室體之間的密封采用先進的機械密封結構。工作時，它與主軸不產生磨擦，機械密封內高壓密封水用水量少，噴放纖維含水率低，降低了干燥機能耗。
c）主機轉動圓盤采用單方向旋轉，操作簡便。
d）蒸煮器木片料位采用r射線檢測，不但能準確地顯示木片料位變化，而且也能控制進料螺旋進料量多少，以滿足工藝對木片預熱時間的要求。
e）運輸螺旋與帶式螺旋之間以補償節連接，可以消除主機與蒸煮器之間由于熱變形而產生的影響。
f）采用帶式螺旋結構可以將進入磨盤之間的木片與蒸汽分離開來。減少了磨削時蒸汽對進料的影響。
a) The feeding screw part adopts a hydraulic automatic compensation system, which automatically compensates for the changes in the height of the feeding screw head caused by the different thermal expansion of the digester at different temperatures.
b) The sealing between the spindle and the grinding chamber adopts an advanced mechanical sealing structure. When working, it does not generate friction with the main shaft, and the high-
pressure sealing water inside the mechanical seal requires less water. The water content of the sprayed fibers is low, which reduces the energy consumption of the dryer.
c) The main engine rotates the disc in a single direction, making it easy to operate.
d) The wood chip level of the digester is detected by X-ray, which not only accurately displays the changes in wood chip level, but also controls the amount of spiral feeding to meet the process requirements for wood chip preheating time.
e) The compensation section connection between the transport screw and the belt screw can eliminate the impact caused by thermal deformation between the main machine and the digester.
f) The use of a belt spiral structure can separate the wood chips entering between the grinding discs from the steam. Reduced the impact of steam on feed during grinding.
應用領域
熱磨機是連續將經過水洗，磁選的一定規格的木片，通過飽和蒸汽加熱軟化后進行研磨分離成合格纖維的設備，分離后的纖維和蒸汽一起從磨室體通過排料閥連續、均勻地排到干燥機。
The thermal mill is a device that continuously grinds and separates wood chips of certain specifications after water washing and magnetic separation into qualified fibers after being heated and softened by saturated steam. The separated fibers and steam are discharged from the grinding chamber body to the dryer continuously and evenly through the discharge valve.
圖片無Alt值的將自動補充為：假如這是我寫的公司名稱
圖片Title：關閉